StopTech Big Brake Kits give your vehicle that Supercar look and feel, and exceed stock performance in two areas. First, larger rotors increase heat capacity. Second, stiffer calipers and stainless steel lines reduce system compliance.

The key, however, is to increase heat capacity and reduce compliance without upsetting the stock front to rear brake torque ratio. If the brake upgrade you select adds too much front torque (as many do), you reduce your car's ability to utilize the tractive capacity of all of the tires to the maximum practical extent (even on ABS equipped cars) and you therefore create performance sacrifices. In addition, too many pistons or pistons that are too large will make the brake pedal much more difficult to modulate, which limits a driver's control of brake input on the race track.

ST-60 - 6 PISTON CALIPER FOR FRONT

Fully forged aluminum construction

Patented, bolt-in bridge minimizes caliper compliance for a firmer pedal

Stiffest 6 Piston caliper currently on the market

Uses standard FMSI D1247 pad (VIEW PAD SHAPE)

Can be used on rotors with outer diameter of 328-380mm and thickness of 28-35mm

ALL finished parts are 100% leak down and pressure tested to 2500 PSI

Uses a popular pad shape readily available in over 15 street performance and race friction compounds

Over 19 different piston size combinations available to tune brake torque to the needs of each individual application

Differential piston sizes minimize pad taper for longer pad life and a firmer pedal

Dust boots are standard for reduced maintenance

ST-40 & ST-45 - 4 PISTON CALIPER (4 piston kits with 380mm rotors use ST-45 calipers)

Fully forged aluminum construction

ALL finished parts are 100% leak down and pressure tested to 2500 PSI

ST-40 uses standard FMSI D372 pad

ST-45 uses standard FMSI D609 pad   

Any combination of 8 piston sizes available to match kit to vehicle application Differential piston sizes minimize pad taper

Dust boots are standard

Weight: 7.94 lb (3.6 kg) unloaded

Same caliper used by top Speed® World Challenge and Grand-Am Cup Teams

ST-10 - 1 PISTON CALIPER PARKING BRAKE FOR REAR KITS

Made of billet aluminum

Different levers to fit your stock parking brake cable

Fits any rotor 28 through 32mm wide

Single piston slider design

Uses standard FMSI D377 Pad

Weight: 4.13 lb (1.9 kg) unloaded

For Money Back: Item must be returned within  7 Days in original packaging. Buyer must pay for return shipping, upon receipt of item, refund will be given for sales value, plus sales tax if applicable.      

Return policy details:      

RETURNS: FOR DEFECTIVE AND DAMAGED MERCHANDISE

1.     Defective and freight damaged merchandise (but only where ModNDrive.com is providing shipment) may be returned to ModNDrive.com for full credit, but only upon verification by ModNDrive.com of such defect or damage.

2.     A Returned Merchandise Authorization ("RMA") form must be filled out by the Buyer and Approved by ModNDrive.com. Credit will be issued to Buyer upon receipt of the RMA form and the claim approval from the freight company.

RETURNS: EXCHANGES & GOOD MERCHANDISE

Returns of good merchandise may be accepted by ModNDrive.com in its sole discretion under the following conditions…

1.     Return/Exchange of merchandise in totally re-saleable condition, without markings on the original packaging will be restricted to extraordinary circumstances with prior approval from ModNDrive.com Accepted returns will be assessed a 20% restocking charge.

2.     Returned part number shall not exceed 15% of total annual purchase quantities.

3.     Return/Exchange of merchandise in packaging that has been marked, relabeled or otherwise defaced will be restricted to extraordinary circumstances with prior approval from ModNDrive.com. Accepted return will be assessed a 20% restocking charge, except that ModNDrive.com merchandise returned in packaging that has been marked, relabeled or otherwise defaced will be subject to a 40% restocking charge.

4.      Returned part number shall not exceed 15% of total annual purchase quantities.

5.      Merchandise classified by ModNDrive.com as TBDC (To Be Discontinued), or DC (Discontinued), may not be returned for credit.

6.      Merchandise on sales promotion or inventory packages may not be returned for credit.

7.      Buyer must pay all return transportation charges.

8.      Buyer must obtain and complete an RMA form, issued by ModNDrive.com for any good merchandise return or exchanges.

9.      Any returns for non-fitment or quality issues will require high quality digital pictures of the products to be emailed to the account manager before an RMA is approved.

10.     Order cancellations will take up to 48 hours after a cancellation is requested before the order is officially cancelled and money processed for return.

11.       Returns/Exchanges will not be accepted under any circumstances after 30 calendar days after the ship date indicated by ModNDrive.com USA.